- Operates on 12 to 24 volts AC/DC
- 12 speed dial buttons (each up to 32 digits) - 12 second number positions (each with 32 digits) - One button operation (no call button) - Hang-up on CPC, busy, silence, time-out or dial tone return - Touch Tone restriction from microphone - Integral relay for camera control or door strike - Works with C-1000B for increased security - Works with C-3000 for ôNo COö operation - Optional Enhanced Weather Protection (EWP) - VE-LIGHT compatible |
Built-in high resolution color video camera with wide viewing, tilt/swivel adjustments and wide operating temperature of -30¦F to 150¦F
Operates on 12 to 24 volts AC/DC 12 speed dial buttons (22 digits each) 12 alternate number positions (22 digits each) One button operation (no call button) Hang-up on CPC, busy, silence, time-out or dial tone return Touch tone restriction from microphone Integral relays for camera control and door strike Works with C-1000B for increased security Works with C-3000 for ôNo COö (phone line) operation Optional Enhanced Weather Protection (EWP) VE-LIGHT compatible 50 keyless entry codes |
915 û 928 MHz frequency-hopping technology
Internal antenna Built-in diagnostic mode for easy maintenance 5 yr battery life (standard) or 8 yr battery life (economy) Black ABS case and polycarbonate crystal FCC Compliant |
- Viking ADA compliant emergency phone
- Stainless steel panel - Built in auto dialer - Digital announcer - Can automatically light the "Call Connected" LED for the hearing impaired - Transmits a unique location ID code or voice announcement - Grade 2 Braille label for the visually impaired - Non-volatile digital voice announcer with 16 seconds of voice memory - Advanced call progress detection - Handsfree operation - Phone line powered - Non-volatile E2 memory (no batteries required) - Touch tone or pulse dialing - Dials up to 5 emergency numbers - Cycles through backup emergency and non-emergency numbers on busy or no answer - Hangs up on CPC, silence, busy signal, dial tone, time-out or touch tone command - Programmable to auto-answer on incoming calls - Remotely programmable - Central station monitoring capability (dials 2 numbers) - Seperate central station voice speed dial number - VKE160002A |
- 15W of paging power
- Drive up to 15 8-ohm speakers - 600-ohm output to drive additional amplifiers - Select: FXO (loop start), FXS (ring trip), or paging port (VOX relay) interface mode - Independent volume controls for Paging, Ringing Tones, and Background Music - 36V DC talk battery for interfacing with FXO or unused phone system line input/trunk port - Compatible with 24V to 48V FXS (ring trip) analog station operation - 800Hz pre-announce page tone (on/off) - Provides "Night Bell" warble tone via contact closure or independent ringing analog circuit - Choose one of four ringing sounds:- Electronic warble (traditional loud ringer)- Double gong (two identical "gong" tones)- Quadruple chime (four descending chime tones)- Door chime (ding-dong) - Night transfer switch input - CPC detection for immediate disconnect - Busy signal detect disconnect - Adjustable silence time out disconnect - Programmable VOX trigger sensitivity and time out - 16 to 72 second (or off) default disconnect timer |
Meets ADA requirements for Emergency Phones:
-Can automatically light the "Call Connected" LED for the hearing impaired -Transmits a unique location I.D. code or voice announcement -Grade 2 Braille label for the visually impaired Non-volatile digital voice announcer with 16 seconds of voice memory Advanced call progress detection Handsfree operation Phone line powered Non-volatile memory (no batteries required) Marine grade 316 stainless steel prevents corrosion on stainless models Dials up to 5 emergency numbers E-1600-20A and E-1600-52A dial up to 3 non-emergency ôINFOö numbers Cycles through backup emergency and non-emergency numbers on busy or no-answer Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD# 859 Hangs up on CPC, silence, busy signal, dial tone, time-out or touch tone command Programmable to auto-answer on incoming calls Remotely programmable Extended temperature range (-15¦F to 130¦F) 9 different chassis or board only available |
- Built-in repeater receives and retransmits clock sync signal
- 915 û 928 MHz frequency hopping technology - Internal antenna - Built-in diagnostic mode for easy maintenance - 5 yr battery life (standard) or 8 yr battery life (economy) - Black ABS case and polycarbonate crystal - Optional double mount housing available (see CL-DMA16) - Battery Life: 5 years (normal mode), 8 years (economy mode) using (2) Duracell Procell ôDö Batteries (not included). Note: standard alkaline batteries can be used but will have a slightly shorter battery life - Clock Dimensions: 16.7? (423mm) outer diameter, 2.6? (66mm) depth - Movement Dimensions: 7.32? x 3.46? x 1.81? (186mm x 88mm x 46mm) - Shipping Weight: 4.5 lbs (2.04 kg) - Temperature: 32¦F to 90¦F (0¦C to 32¦C) - Humidity: 5% to 95% non-condensing - Time Base: Quartz automatic calibration - Input Sensitivity: -103 dBm - Operating Sensitivity: 915-928 MHz frequency hopping technology - Transmitter (Repeater) Power Output: 0.25 Watt (8 dBm), transmits up to 500 ft in open space - Compliance: FCC compliant, part 15, section 15,247 (no license required) - Color: Black - Dial: Durable polystyrene material - Case: Smooth surface ABS case - Crystal: Shatterproof, side molded polycarbonate crystal - Mounting Kit Includes: (2) plastic anchors, (2) 10 x 1.5? sheet metal screws, (1) 4mm threaded 10mm length screw (attached to bracket), (1) mounting bracket, (1) knurled nut, (1) battery cover screw |
18 inch cord and handset for K-1900-712L
|
- Self diagnostic reports via email (testing com, mic, speaker & switch)
- Automatic polling and programming software included - 2 Amp relay contacts for door/gate or SL-2 strobe light control - SIP compatible (see pg 2 for list of compatible IP-PBX phone systems) - PoE powered (class 1, <4 watts) - Automatic Noise Canceling (ANC) feature for proper operation in noisy environments - Network downloadable firmware - Meets ADA requirements for Emergency Phones: - Automatically lights the ôCall Connected" LED - Transmits a unique location I.D. code or voice announcement - Grade 2 Braille label for the visually impaired - Non-volatile digital voice announcer with 28 seconds of voice memory - Handsfree operation - Marine grade 316 stainless steel prevents corrosion on the stainless steel models - Dials up to 5 emergency numbers - E-1600-20-IP and E-1600-52-IP dial up to 5 non-emergency ôINFOö numbers - Cycles through backup phone numbers on busy or no-answer - Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating - Hangs up on busy signal, time-out or touch tone command - Remotely programmable - Extended temperature range (-15¦F to 130¦F) - 11 different chassis or board only available |
2-wire amplified black handset w/ 34öarmored cable for newer K-1500-7(p/n 260245) and K-1500-6A
|
- Economical, attractive, durable stainless steel finish
- Easily installed over drywall or masonry surfaces with supplied hardware - Low profile (3/8") - Vandal and weather resistant - Modular system (add additional capacity at any time) - Lexan plastic window |
- Visual status for up to 24 analog lines or stations (idle, in-use, ringing)
- Programmable ring indication on a per-line basis - Adjustable display viewing angle for desk or wall mounting - Displays require only a single pair of wires - Powers up to (3) LM-24D or LM-12W displays - User printable extension identification cards - Adjustable audio volume - Quick installation - Includes both the display and the scanner - One year warranty - Made in the USA - Ideal for areas where personal attention must be given to every call - Eliminates the additional cost of adding a PABX console or key system - Allows for full utilization of all call pickup features - Monitors the status of lines or stations |
Provide 4 Door Entry Points & Keyless Entry (or Optional Card Readers) for up to 250 Apartments or Offices
RS-232 Port for programming via a PC Remote or local Touch Tone programmable Supports 4 entry points Supports 4 Wiegand type card readers Compatible with VikingÆs vandal resistant K-1700-3, K-1900-8 or any Touch Tone phone Non-volatile memory (no batteries required) Stores 250 tenant Touch Tone phone numbers and 250 entry codes Programmable tenantÆs relay activation code Programmable Master entry code & Maintenance Personnel entry codes Programmable call timer Normally open and normally closed relay contacts for controlling door strikes, magnetic locks, gates, etc. Touch Tone toll restriction Allows 911 and 311 outside calls (Programmable) LOG BUS data output for logging entry events |
- Powerful 70V amplifier drives up to 250 Watt load
- Page from any analog telecom port, or a direct microphone - Auxiliary and Background Music inputs - Individual and Master volume controls - Bass and Treble controls - LEDs show audio level and activity - Programmable input priorities - Chose between 3 different chime sounds - Provides Loud Ringing / Night Bell - Night Transfer switch input - 600 Ohm output to drive additional amplifiers - Adjustable Automatic Level Control - Peak limiter and multiple protection modes |
- SIP compliant
- SIP endpoint or multicast group member - SIP/Multicast: SIP page, SIP page and zoned multicast receive - Plays audio from standard multicast sources - Compatible with Polycom multicast paging - Red ôPage/Statusö LED indicator - Network downloadable firmware - Support for access code to prevent unwanted SIP calls - Network remote volume control - Paging prioritization - Programmable pre-page alert tone - Powerful 70V amplifier drives up to 250 Watt load - Door chime trigger input - Auxiliary and background music inputs - Individual and master volume controls - Bass and treble controls - LEDs show audio level and activity - Provides loud ringing - 600 Ohm output to drive additional amplifiers - Adjustable Automatic Level Control - Peak limiter and multiple protection modes |
- Powerful 70V amplifier drives up to 250 Watt load
- Line input allows connection to any analog line level output, such as: telephone system paging port, paging mixer, etc. - Volume control - Input Level control - Bass and treble controls - Power and volume LEDs |
Industry standard 125KHz RFID technology
26 bit Wiegand format Non-contact reading for long life Use with the Viking PRX-1, PRX-2, PRX-3, PRX-5 or certain legacy 125KHz HID« proximity card readers PRX-C is a durable 0.070ö thick plastic card with a slot for neck strap PRX-C-ISO is a thin 0.032ö thick flexible ôISOö style card PRX-FOB is a durable key ring fob with a IP67 rating allowing it to even withstand the washing machine Up to 253 facility codes and 65,534 card numbers available Cannot be erased by a magnet |
- Industry standard 125KHz RFID technology
-26 bit Wiegand format -Non-contact reading for long life -Use with the Viking PRX-1, 2, 3, 5 and certain legacy 125KHz HID« proximity card readers -PRX-C is a durable 0.070ö thick plastic card with a slot for neck strap -PRX-C-ISO is a thin 0.032ö thick flexible ôISOö style card -PRX-FOB is a durable key ring fob with a IP67 rating allowing it to even withstand the washing machine -Up to 253 facility codes and 65,534 card numbers available -Cannot be erased by a magnet -For Long Range Applications |
- Thin 0.032ö thick flexible ôISOö style card
- Industry standard 125KHz RFID technology - 26 bit Wiegand format - Non-contact reading for long life - Use with the Viking PRX-1, 2, 3, 5 and certain legacy 125KHz HID« proximity card readers - Up to 253 facility codes and 65,534 card numbers available - Cannot be erased by a magnet |
Automatic answering of inbound calls
Inbound calls can be Touch Tone transferred to any port Connects up to 3 emergency phones, or 2 phones can share a line with a phone system Fire Floor Phone port provided to meet elevator code Modular connection for easy installation During power outages, the emergency phones are all connected to the phone line |
- Large 10 inch diameter horn
- 30 watt power handling - Direct 8 ohm connection or step-down transformer connection - Compatible with 25V or 70V paging systems - Weather resistant rugged gray plastic housing - Fully adjustable mounting hardware included - Wide frequency response - Greater intelligibility of voice pages - Suitable for background music - High efficiency |
- Boost ringing on FXS ports or IP phone system analog ports that are weak or fail
- Boost ring power on analog PABX/KSU stations that are weak or fail - Reshapes troublesome distorted ringing signals - True Sine wave ring signal output - Boosts ring to 4 REN - Caller ID compatible - Easy RJ-21X installation - Compatible with distinctive ringing services - Will not affect normal line operation - Reshapes troublesome square wave ringing - Fax and modem compatible - Not compatible with pulse dialing |
4-wire ash amplified G-Style handset for newer K-1500P-D/W, K-1900D/W-2 with modular ends
|
44 Name Stainless Steel Directory
- Economical, attractive, durable stainless steel finish - Easily installed over drywall or masonry surfaces with supplied hardware - Low profile (3/8") - Vandal and weather resistant - Modular system (add additional capacity at any time) - Lexan plastic window |
- Viking Stainless Steel Emergency Phone
- ADA Compliant - Grade 2 Braille Lable for visually impaired - Flush Mount - Handsfree - Dialer Announcer - Non-volatile digital voice announcer with 16 seconds of voice memory - Advanced call progress detection - Phone line powered - Non-volatile E2 memory (no batteries required) - Touch Tone or pulse dialing - Dials up to 5 emergency numbers - Cycles through backup emergency and non-emergency numbers on busy or no-answer - Hangs up on CPC, silence, busy signal, dial tone, time-out or Touch Tone command - Programmable to auto-answer on incoming calls - Remotely programmable - Extended temperature range (-15¦F to 130¦F) - Central Station Monitoring capability (dials 2 numbers) - Separate central station voice speed dial number - Optional PB-100 Polling System available |
- Applications: Elevator phones Emergency phones Area-of-Refuge phones
- Connects up to 6 emergency phones - Allows conferencing of all off hook phones - Automatic answering of inbound calls - Touch Tone transferring - Separate Fire Floor phone port - Machine Room phone and Lobby phone ports - Accomodates the re-dialing feature of the Viking 1600A series phones - Programmable daily line verification check |
- The K-1900-7 panel phone will auto-dial a 1-32 digit programmable phone number each time the handset is lifted.
- The unit will Touch Tone or pulse dial and will not auto-dial on incoming calls. - The K-1900-7 housing consists of a heavy gauge stainless steel panel, an armored cable, a heavy duty handset, and an all metal cradle. - The K-1900-7 can be easily Touch Tone programmed at the shop or installation site. All programming is stored in non-volatile memory. - Operates on analog PABX and key system extensions or analog Centrex and CO lines - Programmable 6 digit security code - Vandal-resistant - Line-Powered |
- 60 watts of total paging power
- 2 separate amplified zones of paging - Drive up to 60 8ohm speakers - Drive up to 100 70V or 25V speakers - Separate input gain controls for each channel - Voltage, current, thermal, and short circuit protected - Super high efficiency allows high power in a small package |
- 8 Inch Speaker
- 10 watt power handling - Compatible with 25V or 70V paging systems - Five Selectable power taps - Metal white grill for flush mounting in office ceilings - Mounting hardware included - Excellent frequency response - Max Power : 10 Watts - 70V Power Taps: .62W, 1.25W, 2.5W, 5W, 10W - 25V Power Taps: .08W, .16W, .31 W, .62W, 1.25W - Viking Taps: .16W, .31W, .62W, 1.25W, 2.5W - Connection: 4ö 22 AWG Pigtail wires (Wire Nuts included) - Dimensions: 12.9ö x 3.0ö (327mm x 76mm) - Shipping Weight: 4.0 lbs (1.81kg) - Environmental: 5% to 95% non-condensing humidity - Frequency Response: 45 Hz to 15,000 Hz - Flush Mount: into an 8.25ö to 10.0ö diameter hole |
- 16 position, back-lit display with 1/2" tall characters
- Non-volatile digital voice announcer - Factory configured to handle 75 apartments (expandable to 525 apartments using ERAM-4M expansion kits - Non-volatile data memory for names, phone numbers and access codes - Volume control - AES-NET card reader interface now included - TTY jack for connection to personal teletypewriter (TTY) - Postal lock swtich input - Surface mount; availabe in flush mount (AES-2000F) configuration - Keyless entry capability - 5 amp door strike/magnetic lock control relays - Vandal resistant features: 12 gauge stainless steel front panel; 1/4" thick abrasion resistant polycarbonate display lens; metal keypad and push button switches; front panel lock; speaker protection screen - Weather resistant features: conformal coated circuit board; gasketing behind lens, speaker, keypad and perimeter of front panel; sealed switches and keypad |
- Automatic answering of inbound calls
- Connects up to (8) emergency phones - Touch Tone transferring - Fire floor phone connection - Built in talk battery for fire floor phone - Call waiting notice - Paging feature - Fully functional battery backup - Non-volatile E memory for all programmable features - Power: 120V AC/13.8V AC 1.25A UL listed adapter provided - Dimensions: 210mm x 159mm x 44mm (8.25 x 6.25 x 1.75) - Connections: (1) RJ21 - Battery Backup: 4 hours |
- Attractive white grill for flush mounting in office ceilings
- Mounting hardware included - Large permanent magnet - Excellent frequency response - Designed to work with all of Viking's paging products - The 35AD includes a volume control |
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |