Shop by Brand: T-H Marine Supplies

Atlas Blinker Trim System - Dual Switch

Trim Control for Hydraulic Helms.

Features:

• Operates Engine Trim and/or Jack Plates
• Fits Hydraulic, Cable, and Tilt Steering
• Dual Switch
• Easy Installation

Atlas Blinker Trim System - Single Switch

Trim Control for Hydraulic Helms.

Features:

• Operates Engine Trim and/or Jack Plates
• Fits Hydraulic, Cable, and Tilt Steering
• Single Switch
• Easy Installation

ATLAS™ Hydraulic Gauge Kit for 4" & 8" ATLAS™ Jack Plate - Black Bezel

Digital LED Position Gauge for Atlas™ Hydraulic Jack Plates.

Features:

• All Digital Readout
• Black Face and Stainless Steel FaceGauges Available
• Outer Bezel available in Stainless Steel or Black Polymer
• Each Number Indicates 1/4” Rise
• Numbered from 0 to 20
• All AtlasTM Jacks are Pre-drilled to Fit
• See pictures to the right to view both styles

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ATLAS™ Hydraulic Gauge Kit for 4" & 8" ATLAS™ Jack Plates - Stainless Steel Bezel

Digital LED Position Gauge for Atlas™ Hydraulic Jack Plates.

Features:

• All Digital Readout
• Black Face and Stainless Steel FaceGauges Available
• Outer Bezel available in Stainless Steel or Black Polymer
• Each Number Indicates 1/4” Rise
• Numbered from 0 to 20
• All AtlasTM Jacks are Pre-drilled to Fit
• See pictures to the right to view both styles

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ATLAS™ Hydraulic Gauge Kit for 6", 10", 12" & 14" ATLAS™ Jack Plate - Black Bezel

Digital LED Position Gauge for Atlas™ Hydraulic Jack Plates 

Features:

• All Digital Readout
• Black Face and Stainless Steel Face Gauges Available
• Outer Bezel available in Stainless Steel or Black Polymer
• Each Number Indicates 1/4” Rise
• Numbered from 0 to 20
• All ATLAS™ Jacks are pre-drilled to Fit
• See pictures to the right to view both styles

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ATLAS™ Hydraulic Gauge Kit for 6", 10", 12" & 14" ATLAS™ Jack Plates - Stainless Steel Bezel

Digital LED Position Gauge for Atlas™ Hydraulic Jack Plates.

Features:

• All Digital Readout
• Black Face and Stainless Steel FaceGauges Available
• Outer Bezel available in Stainless Steel or Black Polymer
• Each Number Indicates 1/4” Rise
• Numbered from 0 to 20
• All AtlasTM Jacks are Pre-drilled to Fit
• See pictures to the right to view both styles

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

BANSHEE™ Alarm Padlock

Protect Your Boats, Trailers and Property

The BANSHEE™ is an alarm-equipped padlock for protecting any valuable item, boat or trailer from theft. When tampered with the alarm "scream like a Banshee" warding off potential thieves.

Vibration-activated 110 Decibel Alarm Screams Like A Banshee When Activated Can Be De-Activated For Trailering Fits Most Trailer Couplers Weatherproof.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Black ATLAS™ Series Hydraulic Jack Plate Standard Anodized

The Atlas revolutionary design meets the demands of today's high performance outboards. The one piece design, featuring the innovative Rod and Slot lifting system, will handle the stresses from the heaviest and most powerful outboards, up to 300 HP or 625 pounds, on the market today. 

All of the hydraulics are built into the jack eliminating the necessity of installing pumps and reservoirs inside the transom. The all new hydraulic unit is fast too..lifting from bottom to top in 8 seconds!

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Bolt Kit for Jack Plates

Features:

• For Mounting Outboard to Plate
• Kit Contains: 4 each 1/2” x 3” stainless steel long bolts, 4 each 1/2” lock nuts – brass with nylon insert, 8 each 1/2” flat washers - stainless steel

Double Barb Inline Scupper Check Valve - 1-1/2" - Black

A great solution to provide a scupper check valve in the drain line.  Allows use of standard thru-hull fittings in the cockpit and on the hull exterior. 

Features:

• Prevents Backwash
• Chemical Resistant Materials
• Thermo-Plastic Flapper

Double Barb Inline Scupper Check Valve - 1-1/8" - Black

A great solution to provide a scupper check valve in the drain line.  Allows use of standard thru-hull fittings in the cockpit and on the hull exterior. 

Features:

• Prevents Backwash
• Chemical Resistant Materials
• Thermo-Plastic Flapper

Double Barb Inline Scupper Check Valve - 3/4" - Black

A great solution to provide a scupper check valve in the drain line.  Allows use of standard thru-hull fittings in the cockpit and on the hull exterior. 

Features:

• Prevents Backwash
• Chemical Resistant Materials
• Thermo-Plastic Flapper

Flow-Max™ Ball Scupper - Clear

Replace your old worn-out flapper scupper with our new Flow-Max™ positive sealing ball scupper. A larger exit hole allows 70% more water drainage than its nearest competitor. Multiple mounting holes make retrofits quick and easy - no filling holes or re-drilling. A neutral buoyancy ball ensures the ball won't float up and break the seal. Meets all ABYC standards.

The easy twist-off design makes cleaning debris a snap. Simply twist counterclockwise to remove the ball cavity, clean out and twist back on. Stainless steel security pin provided for added safety.

Features:

• Replaces worn out flapper scuppers
• 70% more drainage than competitive models
• Twist off for easy cleaning
• Retrofits all hole patterns
• The seal is slotted to fit over 1-1/4" motor well tubes
• 3” Diameter x 2-1/2” H

The Flow Max Scupper only comes with one screw. The screws that screw it to the boat do not come with it.  They will be different for every boat depending on the hull thickness but you will need a flat head screw.  Screw included is a #4 x 1/4" Phillips Pan Head Stainless Steel Screw.

Foam Rod Holders

Versatile 6 Rod Storage Rack. Molded frame with slit closed-cell foam inserts hold up to six rods safely and securely.

Features:

• Stores 6 rods neatly and securely
• Mount horizontally or vertically
• Foam grip pads
• Great for boats, RVs or garages
• Economical for boat rod lockers
•  Corrosion proof
• Durable and lightweight

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force Conservation Cull System Gen 2

Features:

• Simplified Cull Clip
• Stainless Steel Spring Loaded One Hand Operation
• Removable Floats
• Color Coded Line
• Non-penetrating Clip
• Balance beam included
• 6 color-coded buoys
• Allows quicker culling- More fishing time!
• Uses a stronger plastic clip to hold tight around the lip
• Buoy holder for quick and easy storage of each Cull Ball

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force Conservation Cull System Weight Kit - 3 Per Pack

WEIGHT ONLY- CLIP NOT INCLUDED

Features:

• Reduce Stress
• 2 oz Weight
• Increase chance of survival
• Stabilizes the bass without harming them
• More than 1 clip may be needed for larger fish
• Simple to use clip, attaches to the G-FORCE Cull Clip
• Works for Gen 1 and Gen 2 Conservation Culling System
• Package comes with 3 weights

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force ELIMINATOR Red Prop Nut for Lowrance Ghost Trolling Motor

One of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. 

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. 

Made to fit Lowrance Ghost trolling motors. This specific part comes in red color to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut. 

Key Eliminator Benefits:

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures the nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.
• Patent pending

G-Force ELIMINATOR Trolling Motor Black Prop Nut for Minn Kota 35-70 Trolling Motor

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.

Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.

Key ELIMINATOR Benefits:

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force ELIMINATOR Trolling Motor Black Prop Nut f/Minn Kota 80-101-112 Trolling Motor

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.

Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.

Key ELIMINATOR Benefits:

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force ELIMINATOR Trolling Motor Black Prop Nut for Motorguide Trolling Motor

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.

Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.

Key ELIMINATOR Benefits:

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force ELIMINATOR Trolling Motor Blue Prop Nut for Minn Kota 35-70 Trolling Motor

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.

Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.

Key ELIMINATOR Benefits:

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force ELIMINATOR Trolling Motor Blue Prop Nut for Minn Kota 80-101-112 Trolling Motor

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.

Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.

Key ELIMINATOR Benefits:

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force ELIMINATOR Trolling Motor Blue Prop Nut for Motorguide Trolling Motor

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.

Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.

Key ELIMINATOR Benefits:

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force ELIMINATOR Trolling Motor Clear/Silver Prop Nut for Minn Kota 35-70 Trolling Motor

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.

Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.

Key ELIMINATOR Benefits:

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force ELIMINATOR Trolling Motor Clear/Silver Prop Nut for Minn Kota 80-101-112 Trolling Motor

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.

Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.

Key ELIMINATOR Benefits:

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force ELIMINATOR Trolling Motor Clear/Silver Prop Nut for Motorguide Trolling Motor

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.

Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.

Key ELIMINATOR Benefits:

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force ELIMINATOR Trolling Motor Red Prop Nut for Minn Kota 80-101-112 Trolling Motor

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.

Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.

Key ELIMINATOR Benefits:

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force ELIMINATOR Trolling Motor Red Prop Nut for Motorguide Trolling Motor

One of the latest products in the G-Force line up is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Made to fit most Minn Kota and MotorGuide trolling motors. Comes in an assortment of colors to provide a sleek, matching aesthetic.

Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.

Key ELIMINATOR Benefits:

• Machined from 6061 Billet Aluminum
• O-ring dampens noise/vibration and secures nut
• Wider contact area for a more stable prop
• Cooling ports aid in heat dissipation
• Anodized protected
• No tools needed
• Available in popular colors
• Visually appealing
• Designed and made in the U.S.A.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force EQUALIZER Trolling Motor Lift Assist - Black

The G-Force EQUALIZER™ trolling motor list assist system consists of two air pistons that attach to almost any Motorguide Gator Mount to provide effortless lifting in-and-out of the water.  Complete with easy-to-follow instructions, drilling template, and marine-grade hardware, the EQUALIZER™ is quick and straightforward to install. A must-have for any Motorguide owner, the EQUALIZER™  is a great way to offset the added weight of StructureScans and Hydrowaves, so your time on the water is as comfortable as possible.

Includes:

• 2X EQUALIZER™ Trolling Motor Assist Air Pistons
• Drilling template
• Marine-grade stainless steel hardware
• Instructions
• Picture of the mount and basic guidelines
• Equalizer decal
• Spacer set available for certain boats that need a riser spacer on gunnel
• NOTE:  Not compatible with Motorguide X3 motors

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force Grass Goat Trolling Motor Weed Guard for Minn Kota Large - Fortrex 112-Ultrex 80-112

A must-have for anglers who spend a lot of time in heavily vegetated areas, the Grass Goat is an aftermarket cutting-tool for your trolling motor that slices through vegetation and keeps your trolling motor clear of debris. Featuring a genuine marine grade starboard mounting plate, it also comes equipped with a 316 stainless steel cutting-blade to ensure years of use under the toughest conditions.

Incredibly easy to install, the Grass Goat comes with all of the necessary mounting hardware and easy-to-follow instructions that will have you fishing weedlessly in no time. Don’t waste anymore time removing grass from your trolling motor when your fishing through your favorite honey hole, get the Grass Goat today.

Features:

• Keeps your trolling motor clear of debris
• Genuine Marine Grade
• Starboard Mounting Plate
• Stainless Steel Cutting-Blade
• NOTE: This product is not compatible with Minn Kota Edge motors

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

G-Force Grass Goat Trolling Motor Weed Guard for Minn Kota Small 80-101

A must-have for anglers who spend a lot of time in heavily vegetated areas, the Grass Goat is an aftermarket cutting-tool for your trolling motor that slices through vegetation and keeps your trolling motor clear of debris. Featuring a genuine marine grade starboard mounting plate, it also comes equipped with a 316 stainless steel cutting-blade to ensure years of use under the toughest conditions.

Incredibly easy to install, the Grass Goat comes with all of the necessary mounting hardware and easy-to-follow instructions that will have you fishing weedlessly in no time. Don’t waste anymore time removing grass from your trolling motor when your fishing through your favorite honey hole, get the Grass Goat today.

Features:

• Keeps your trolling motor clear of debris
• Genuine Marine Grade
• Starboard Mounting Plate
• Stainless Steel Cutting-Blade
• NOTE: This product is not compatible with Minn Kota Edge motors

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.