Shop by Brand: T-H Marine Supplies

Replacement Actuator for ATLAS™ Jack Plates Post March 2014

Features:

• Allows customers to remove the motor from a faulty AHJACT-3-DP and replacement it with a new one
• More cost effective than replacing the entire actuator

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Replacement Relay Harness for Hydraulic Jack Plates 2014+

Genuine Replacement Part for Atlas Hydraulic Jack Plate.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Steer Stop Outboard Hydraulic Steering Lock Set - 4"

T-H Marine developed the first steering stop available for outboard motors and now we've revised that design so it stands apart from imitation and performs better than any other on the market. 

With our 4" Steer Stop Outboard Hydraulic Steering Lock in place, boaters can center their outboard motor equipped with hydraulic steering and keep it from wandering when trailering. Similar to the original Steer Stop, units clip onto hydraulic steering rams on either side of outboard to keep engine straight and prevent damage to motor supports. The cord then keeps units together when stowed and aids removal.

Additionally, with the new grip built into the design, it is easier than ever to install and remove the Steer Stop Outboard Hydraulic Steering Lock, saving you effort and wear and tear on your hands.

Features:

• Must-know information about the 4" Steer Stop Outboard Hydraulic Steering Lock:
• Locks hydraulic steering when trailering
• Fits most steering cylinder rods on outboard engines
• Snaps over outboards hydraulic steering cylinder rods
• Helps keep engine centered during transport
• Protects steering system, outboard, and motor supports
• Includes cord to connect units for storage and to aid in removal
• Grip makes it even simpler and easier to put on and take off

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Steering Trim Control Unit

Trim Switches on the Steering Wheel Improve Safety and Performance. 

This steering trim control unit is molded of black plastic with raised white letters to not only enhance boat appearance but also provide the ultimate in control of any high performance boat. The steering trim control unit mounts easily to steering wheel spokes to place engine trim control at your finger tips for maximum safety and ease of operation. The weather proof, rubber booted, push button switches combined with a black urethane coiled cord provide a unit which will provide trim control without removing hands from steering wheel.

Features:

• Puts trim switches on steering wheel for convenience and safety
• Allows driver to keep both hands on the steering wheel
• Mounts easily on steering wheel spokes
• Weatherproof rubber booted switches
• Rugged urethane coiled cord
• Can be used for trim control or jack plate control

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Straight Barbed All-Purpose Drain - White

1-3/8" White Concaive Head Drain. These molded drains, available in straight and 90-degree versions, offer a low-cost method to drain water from virtually anywhere. They have a very low-profile concave head to allow complete drainage. Drains mount easily in a 1-3/8" diameter hole and are secured with the molded nut that is included. Hose barbs fit a 3/4" hose for routing of drainage.

Specifications:

• Color: White
• Fits Hole Diameter: 1-3/8"
• Water Connection: 3/4" Hose

T-H FLEX™ 1-1/2" Expandable Braided Sleeving - 50' Roll

T-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. Only a few sizes are needed to cover a large diameter range, since each size of T-H FLEX™ expands up to four times its normal diameter.  The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.

Features:

• Lightweight Protective Sleeving
• Protects Wire, Cables and Hoses
• Braided from High Temperature Yarns
• Chemical Resistant
• Simplifies and beautifies any rigging application

T-H FLEX™ 1-1/4" Expandable Braided Sleeving - 50' Roll

T-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. Only a few sizes are needed to cover a large diameter range, since each size of T-H FLEX™ expands up to four times its normal diameter.  The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.

Features:

• Lightweight Protective Sleeving
• Protects Wire, Cables and Hoses
• Braided from High Temperature Yarns
• Chemical Resistant
• Simplifies and beautifies any rigging application

T-H FLEX™ 1/2" Expandable Braided Sleeving - 100' Roll

T-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. Only a few sizes are needed to cover a large diameter range, since each size of T-H FLEX™ expands up to four times its normal diameter.  The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.

Features:

• Lightweight Protective Sleeving
• Protects Wire, Cables and Hoses
• Braided from High Temperature Yarns
• Chemical Resistant
• Simplifies and beautifies any rigging application

T-H FLEX™ 1/4" Expandable Braided Sleeving - 100' Roll

T-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. Only a few sizes are needed to cover a large diameter range, since each size of T-H FLEX™ expands up to four times its normal diameter.  The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.

Features:

• Lightweight Protective Sleeving
• Protects Wire, Cables and Hoses
• Braided from High Temperature Yarns
• Chemical Resistant
• Simplifies and beautifies any rigging application

T-H FLEX™ 2" Expandable Braided Sleeving - 50' Roll

T-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. Only a few sizes are needed to cover a large diameter range, since each size of T-H FLEX™ expands up to four times its normal diameter.  The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.

Features:

• Lightweight Protective Sleeving
• Protects Wire, Cables and Hoses
• Braided from High Temperature Yarns
• Chemical Resistant
• Simplifies and beautifies any rigging application

T-H FLEX™ 3/4" Expandable Braided Sleeving - 100' Roll

T-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. Only a few sizes are needed to cover a large diameter range, since each size of T-H FLEX™ expands up to four times its normal diameter.  The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.

Features:

• Lightweight Protective Sleeving
• Protects Wire, Cables and Hoses
• Braided from High Temperature Yarns
• Chemical Resistant
• Simplifies and beautifies any rigging application

Toggle Anchor Kit

Game-changing hardware for mounting trolling motors and table and seat pedestals, especially on decks and bulkheads where access is limited. Secures any accessory that will receive a high amount of torque at the fastening location.  

Features:

• Stainless steel toggle 2” long x 0.45” wide
• Accepts ¼”-20 fasteners
• Requires a ½” mounting hole
• Great for tables, seat bases, and trolling motors

Transom Support Plate Lower Mount

Features:

• 10" Bolt Hole Pattern
• Top Bolt Holes-Standard
• 3/8" Thickness. High quality Cast Aluminum
• Distributes the stress of the motor mounting bolts

Transom Trim Control Push Button Trim Switch

Transom Trim Control Switch/Hydraulic Jack Plate Switch

Put a trim switch or hydraulic jack plate anywhere you want with this versatile switch.  The Transom Trim Control Switch provides a weatherproof tilt control system at the stern area of the boat to facilitate placing motor support in position with one person. Switch can also be used for remote adjustment of hydraulic jack plates. The switch housing is molded black plastic with raised white letters and may be mounted on any flat surface, comes with 18" pigtail wire and installation instructions.

Features:

• Trim switch for outboards or stern drives
• Hydraulic jack plate switch
• Puts Tilt & Trim Control Anywhere
• Weatherproof Control Switches
• UV stable molded housing
• Can Also Operate Power Jack Plates

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Troll-Tamer™ for Minn Kota Fortrex Trolling Motor Stabilizer Lock 2-3/4"-4-1/2" Spacing 

The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions

The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Troll-Tamer™ for Minn Kota Fortrex Trolling Motor Stabilizer Lock 3-1/2"-5" Spacing 

The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions

The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Troll-Tamer™ for Minn Kota Fortrex/Ultrex Trolling Motor Stabilizer Lock 5"-8" Spacing

The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions

The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Troll-Tamer™ for Minn Kota Maxxum Trolling Motor Stabilizer Lock 5"-8" Spacing 

The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions

The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Troll-Tamer™ for Minn Kota Terrova & MotorGuide Trolling Motor Stabilizer Lock 5"-8" Spacing

The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions

The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Troll-Tamer™ for Minn Kota Terrova & MotorGuide Trolling Motor Stabilizer Lock 8"-12" Spacing

The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions

The latest models, RMC-108-DP and RMC-109-DP feature a clamp on shaft bracket to work with the latest in digital, wireless bow mount trolling motors, including Minn Kota Terrova, Auto Pilot, Riptide models & Motor Guide Xi5.

Troll-Tamer™ for MotorGuide Trolling Motor Stabilizer Lock 5"-8" Spacing

The Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, the Troll-Tamer™ Trolling Motor Stabilizer Lock has been designed and tested in the nastiest conditions by top touring pros. The Troll-Tamer™ Trolling Motor Stabilizer Lock is machined from 300 Series Stainless Steel and assembled to endure even the roughest conditions 

Washdown Fitting with Shutoff Valve

This bulkhead-mounted washdown fitting is inexpensive, functional, easy to install, and rust-proof. This injection-molded plastic fitting is 2 1/4" in diameter and mounts in a 1 1/4" diameter hole with 3 countersunk screws. 

Features:

• Black flange color
• Injection-molded, UV-stabilized, and rust-proof
• Standard garden hose thread outlet
• The inlet fits 3/4" marine hose
• Protective cap with retainer
• The flange dimension is 2-1/4" OD
• Installation in a 1-1/4" hole
• Straight inlet configuration
• Shutoff valve

Washdown Valve with Chrome Base

A bulkhead-mounted washdown fitting that is inexpensive, functional, easy to install, and rust-proof. This injection-molded, chrome-plated ABS fitting is 2 1/4" in diameter and mounts in a 1 1/4" diameter hole with 3 countersunk screws. 

Features:

• A barbed hose fitting connects 3/4 in. inside-diameter tubing
• Standard hose threads with a protective cap that has a retaining strap are standard
• Chrome-plated ABS flange
• Injection-molded, UV-stabilized, and rust-proof
• Standard garden hose thread outlet
• The inlet fits 3/4 in. marine hose
• Protective cap with retainer
• The flange dimension is 2-1/4 in. OD
• Installation in a 1-1/4" hole
• Straight fitting with shutoff valve

Z-LAUNCH™ 10' Watercraft Launch Cord for Boats up to 16'

Makes launching boat by yourself as easy as 1-2-3!

Endorsed and used by professional angler Timmy Horton. Used by the majority of BASS and FLW fishing professionals.

The Z-LAUNCH™ Watercraft Launch Cord makes solo watercraft launching easier than you've ever experienced. The no-hassle launch cord, made of premium elastics, uses automatically adjusting tension when you back your boat, jet ski, or tow tube into the water, so it won't jerk your watercraft around when you pull the trailer forward. Expandable to more than 20', the Z-LAUNCH™ Watercraft Launch Cord attaches in just 3 steps. Fasten a hook to your boat, connect a steel ring to the winch, and lock the winch. You're ready for the smoothest watercraft launching on the water.

Features:

• Simple and safe operation
• No-hassle design
• Attaches easily
• Expands to more than 20'
• Unlike rope, will not jerk your watercraft or you
• Stay safe and dry launching your boat alone
• Great for ramps with "no power" laws

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Z-LAUNCH™ 15' Watercraft Launch Cord for Boats 17' - 22'

Makes launching boat by yourself as easy as 1-2-3!

Endorsed and used by professional angler Timmy Horton. Used by the majority of BASS and FLW fishing professionals.

The Z-LAUNCH™ Watercraft Launch Cord makes solo watercraft launching easier than you've ever experienced. The no-hassle launch cord, made of premium elastics, uses automatically adjusting tension when you back your boat, jet ski, or tow tube into the water, so it won't jerk your watercraft around when you pull the trailer forward. Expandable to more than 20', the Z-LAUNCH™ Watercraft Launch Cord attaches in just 3 steps. Fasten a hook to your boat, connect a steel ring to the winch, and lock the winch. You're ready for the smoothest watercraft launching on the water.

Features:

• Simple and safe operation
• No-hassle design
• Attaches easily
• Expands to more than 20'
• Unlike rope, will not jerk your watercraft or you
• Stay safe and dry launching your boat alone
• Great for ramps with "no power" laws

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Z-LAUNCH™ 20' Watercraft Launch Cord for Boats 23'-35'

Makes launching boat by yourself as easy as 1-2-3!

Endorsed and used by professional angler Timmy Horton. Used by the majority of BASS and FLW fishing professionals.

The Z-LAUNCH™ Watercraft Launch Cord makes solo watercraft launching easier than you've ever experienced. The no-hassle launch cord, made of premium elastics, uses automatically adjusting tension when you back your boat, jet ski, or tow tube into the water, so it won't jerk your watercraft around when you pull the trailer forward. Expandable to more than 20', the Z-LAUNCH™ Watercraft Launch Cord attaches in just 3 steps. Fasten a hook to your boat, connect a steel ring to the winch, and lock the winch. You're ready for the smoothest watercraft launching on the water.

Features:

• Simple and safe operation
• No-hassle design
• Attaches easily
• Expands to more than 20'
• Unlike rope, will not jerk your watercraft or you
• Stay safe and dry launching your boat alone
• Great for ramps with "no power" laws

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Push-In Drain Plug for 1-1/8" Thru-Hull & All Purpose Drains

These push-in drain plugs are used to stop water flow through drains or overflows from baitwell or livewell. Also work well as plugs for sink drains and built in cooler drains.

Plugs are a perfect compliment to T-H Marine overflow drain tubes.

These pvc push-in drain plugs are injection molded of marine grade PVC for a long lifespan. Plugs feature a pull tab or pull ring for easy removal.  They have double seal rings to assure positive sealing.     

Push-In Drain Plug f/1-1/2" Thru-Hull Drains

These push-in drain plugs are used to stop water flow through drains or overflows from baitwell or livewell. Also work well as plugs for sink drains and built in cooler drains.

Plugs are a perfect compliment to T-H Marine overflow drain tubes.

These pvc push-in drain plugs are injection molded of marine grade PVC for a long lifespan. Plugs feature a pull tab or pull ring for easy removal.  They have double seal rings to assure positive sealing.