This storm collar is used to maintain a weather-tight resistant seal between the pipe and the flashing to keep out debris and water.
|
This cathedral ceiling vertical kit includes a vertical cap to provide a secure seal on a pipe, storm collar to prevent debris and water from entering the chimney liner, cathedral ceiling support box with trim and clamp, adjustable roof flashing, and appliance adaptor to connect to your appliance. Pipe lengths not included.
|
This vertical kit for flat ceilings includes a vertical cap for closing off the pipe with a tight seal, storm collar to keep water and debris from entering the liner, ceiling support firestop spacer to reduce the chances of a fire, adjustable flashing for your roof, and appliance adaptor to ensure a secure connection to your appliance. Also includes a 3" - 4" appliance adaptor/increaser and support clamp. Pipe lengths not included.
|
This wall thimble air intake kit allows outside fresh air for combustion through the wall thimble without having to cut a second hole into the wall. Comes with an insulation ring to reduce air infiltration where the pipe slips through the thimble. The 2" diameter flex hose is 10' in length. Clamps included. Can be used in US and Canada.
|
This appliance adaptor/increaser is used to attach to an appliance outlet, allowing for easy pipe connection. Allows connection of 4" vent to 3" appliance outlet. Seal adaptor to appliance with high temperature sealant.
|
This appliance adaptor/increaser is used to attach to an appliance outlet, allowing for easy pipe connection. Allows connection of 4" vent to 3" appliance outlet. Seal adaptor to appliance with high temperature sealant.
|
DuraVent Part Number: 3PVP-X4
3" To 4" Pellet Vent Pro Increaser This item cannot ship to APO/FPO addresses. . M&G DuraVent provides no warranty for the following professional products if such products are not installed by a trained professional installer: DuraTech-+, DuraPlus HTC-+, DuraChimney-+ II, PelletVent Pro-+, DirectVent Pro-+, FasNSeal-+, FasNSeal-+ W2, FasNSeal-+ Flex, and PolyPro-+, and M&G DuraVent's relining products including DuraLiner-+, DuraFlex-+ (SW, Pro, 316, 304), and Ventinox-+. G¬= Any M&G DuraVent product sold by a non-approved website will not be warranted. G¬= Any customer that has bought product from a non-approved website will not be given technical assistance or support from M&G DuraVent. G¬= Any website not compliant with this Internet Sales Policy shall not use M&G DuraVent's trademarked and registered properties, and will be notified to remove them immediately. DuraVent reserves the right to enforce its intellectual property rights against entities not in compliance with this Internet Sales Policy. |
This firestop spacer can help provide additional clearance from your venting to combustibles, ensuring better fire protection. Use at every ceiling level where Square Firestop Support is not used.
|
This adjustable elbow offsets obstructions as needed. Elbow swivels 360-degree at base. Adjustable from 0 to 45 degrees. Elbow must be supported when installed.
|
Use to connect appliance or single-wall connector to vent system. This product is manufactured by DuraVent. This product is manufactured in United States.
|
This cap is required where pipe terminates above the roof line. Use for vertical installations only.
|
Use this roof flashing to weatherproof the penetration of vent pipe through the roof. Storm Collar required. Select roof flashing based on pitch of roof. For pitches of 0/12 - 6/12. Made of galvalume.
|
This firestop support is used to support vent at ceiling level. Includes clamp that supports and prevents pipe sections from slipping down. Provides the mandatory 1" clearance to combustibles. Straps extend 16"
|
3" Dura-Vent Type B Gas Vent Storm Collar - Use to maintain a weather tight resistant seal between the pipe and the flashing. See all 3" Dura-Vent B Gas Vent Components. |
This tee is used for a 90-degree offset or to combine connectors from two or more appliances into a common vent. Branch swivels for alignment. 3" - 8" feature swivel on male end.
|
This tee cap is used to cover standard tee or increaser tee. Remove tee cap to inspect the system; clean out debris or collected condensate from the common vent. Fits on inner liner.
|
This wall strap is used to provide support for offsets and horizontal runs. Recommended every 4¬ to support vertical common vent. Use also with DuraConnect or DuraConnect II. Wall Strap legs can be rotated 360 degrees to conceal screw.
|
This wall thimble is used for through-the-wall system to provide clearances for vent from combustibles. Adjusts from 3+" to 6" to accommodate various wall thicknesses.
|
This pipe extension is used to add 3" to 10" to rigid sections of pipe.
|
This chimney pipe features fully unitized, twist-lock construction. Listed at 1" clearance to combustibles in the USA and Canada. It can be used in both vertical and horizontal installations. Stainless steel welded seam inner wall, combined with a galvalume welded seam outer wall. To calculate installed length, subtract 1 1/2" from each length of pipe.
|
This pipe extension is used to add 3" to 10" to rigid sections of pipe.
|
This chimney pipe features fully unitized, twist-lock construction. Listed at 1" clearance to combustibles in the USA and Canada. It can be used in both vertical and horizontal installations. Stainless steel welded seam inner wall, combined with a galvalume welded seam outer wall. To calculate installed length, subtract 1 1/2" from each length of pipe.
|
Use for venting listed natural gas or liquid propane Category I, draft hood appliances, or appliances that have been specifically tested and listed to use Type B Gas Vent. The appliances listed typically use Type B Gas Vent systems, but not always: Furnaces, Water Heaters, Boilers, Room Heaters, Decorative Gas Appliances, and Unit Heaters. To calculate installed length, subtract 1 1/2ÿ from each connection of vent. A 1ÿ clearance (air space) to combustible materials must be maintained. To calculate OD add 5/8ÿ.
|
3" X 15' DuraFlex 304-Alloy Stainless Steel Liner is used with wood-pellet, non-condensing gas, wood-burning, and oil appliances.
|
3" X 15' Duravent DuraFlex 304-Alloy Stainless Steel Basic Liner Kit includes: DuraFlex SS Top Plate, DuraFlex SS Cap, DuraFlex SS Connector, and DuraFlex 304 length.
|
PelletVent Pro Collection 18 Inch Pipe Length Extension - 3 Inch Inside Diameter Notice: M&G DuraVent applies to this professional grade product only when installed by a trained professional installer. This 18 Inch Pipe Length Extension - 3 Inch Inside Diameter from the PelletVent Pro series is a Type L Biofuel Chimney Pipe component and consists of the duralock system for a tight seal. Use to add length to PelletVent Pro pipe. 12 pipe adds 3-10 of length, 18 pipe adds 3-16 of length, when used with rigid sections of pipe. Galvalume or painted black outer finish. Features: Fuel Type: BioFuel, Oil, Pellet Inner Diameter: 3" Length: 3" to 16" Double Wall Construction UL Listed All PelletVent Pro-+ components that come into contact with flue gases are built with an inner wall of corrosion resistant superferritic metal. PelletVent Pro is engineered with features for a durable, safe and aesthetically pleasing venting system. PelletVent Pro is a patent-pending venting system for stoves and inserts that use wood pellets, corn and other biofuels, or oil, as fuel. As a result of DuraVents cutting-edge manufacturing process and commitment to innovation, PelletVent Pro is uncompromised in attention to detail and performance. This perfect fit and finish is made possible with a laser-welded inner and outer wall. Select components are available in black. PelletVent Pro is now UL listed for 1 clearance to combustibles in the USA. Its double-wall, air-insulated design offers superior performance. Seams are factory-sealed on all elbows, tees, and fittings. Since the introduction of pellet stoves in the 1980s, DuraVent is recognized as the industry leader in venting systems for pellet stoves. Looking for Simpson Dura-Vent? You found it! Simpson Dura-Vent has changed their name to DuraVent. DuraVent is a recognized technological leader in the venting industry
|
Use to add length to Pellet Vent Pro pipe. Galvalume or painted black outer finish. This product is manufactured by M&G DuraVent. This product is manufactured in United States.
|
Use for venting listed natural gas or liquid propane Category I, draft hood appliances, or appliances that have been specifically tested and listed to use Type B Gas Vent. The appliances listed typically use Type B Gas Vent systems, but not always: Furnaces, Water Heaters, Boilers, Room Heaters, Decorative Gas Appliances, and Unit Heaters. To calculate installed length, subtract 1 1/2ÿ from each connection of vent. A 1ÿ clearance (air space) to combustible materials must be maintained. To calculate OD add 5/8ÿ.
|
3" X 20' Duravent DuraFlex Stainless Steel Pre-Cut Light Liner can be used with wood-pellet, non-condensing gas, wood-burning, and oil appliances.
|
This chimney pipe features fully unitized, twist-lock construction. Listed at 1" clearance to combustibles in the USA and Canada. It can be used in both vertical and horizontal installations. Stainless steel welded seam inner wall, combined with a galvalume welded seam outer wall. To calculate installed length, subtract 1 1/2" from each length of pipe.
|
Use for venting listed natural gas or liquid propane Category I, draft hood appliances, or appliances that have been specifically tested and listed to use Type B Gas Vent. The appliances listed typically use Type B Gas Vent systems, but not always: Furnaces, Water Heaters, Boilers, Room Heaters, Decorative Gas Appliances, and Unit Heaters. To calculate installed length, subtract 1 1/2ÿ from each connection of vent. A 1ÿ clearance (air space) to combustible materials must be maintained. To calculate OD add 5/8ÿ.
|
3" X 25' Duravent DuraFlex 304-Alloy Stainless Steel Basic Liner Kit includes: DuraFlex SS Top Plate, DuraFlex SS Cap, DuraFlex SS Connector, and DuraFlex 304 length.
|
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |