This elbow offsets obstructions as needed. Elbows angles are now adjustable. Adjustable elbows are manufactured drip-free so creosote travels back to the stove as intended.
|
This slip connector is used to adapt DuraBlack pipe to ceiling support box or finishing collar. Adds 3" - 13" of length to rigid pipe. Allows drip-free installation without cutting the pipe. Can be used in line to create a telescoping combination when used with a straight length of pipe. Requires screws.
|
This tee with clean-out cap is used to provide a solid connection for rear exit appliances and appliances that require a barometric damper. The added cap makes cleaning and maintenance simple.
|
This adaptor is used to adapt DuraBlack stove pipe to appliance flue outlet.
|
6" DuraBlack Stove Pipe Kit is used to connect between appliances and chimneys for a typical 8' through-the-ceiling installation. Kit includes: 14" DuraBlack Slip Connector w/Trim and (2) 24" DuraBlack Single-Wall Black Pipe.
|
This trim collar is used as a decorative addition for DuraBlack connection to chimney to ensure a solid fit and an aesthetic appearance.
|
6" DuraFlex All Fuel Component Kit includes: DuraFlex stainless steel top plate, DuraFlex stainless steel cap, and DuraFlex stainless steel tee. Flex lengths not included.
|
6" DuraFlex Flex Puller is used with a rope to guide DuraFlex lengths down masonry chimney.
|
6" DuraFlex Gas Component Kit includes: DuraFlex stainless steel top plate and DuraFlex stainless steel cap. Flex lengths not included.
|
6" DuraFlex Stainless Steel Rain Cap With Clamp Band is used to terminate a relining system at the top of the masonry chimney. Supports flex with a fast connect band.
|
6" DuraLiner 30-degree Oval-to-Oval Stove Connector is used to connect an insert to oval DuraLiner pipe at a 30-degree angle.
|
6" DuraLiner 30-degree Round-to-Round Stove Connector is used to connect an insert to round DuraLiner pipe at a 30-degree angle.
|
6" x 12" Duraliner 304-Alloy Stainless Steel 12" Rigid Pipe is used to reline masonry chimney with 0/0 clearance. Factory-insulated. Built-in, pre-drilled fittings for riveting joints. 304 stainless steel inner and aluminized steel outer.
|
DuraVent Part Number: 4666
DuraLiner, 6" Adjustable Sleeve This item cannot ship to APO/FPO addresses. . M&G DuraVent provides no warranty for the following professional products if such products are not installed by a trained professional installer: DuraTech-+, DuraPlus HTC-+, DuraChimney-+ II, PelletVent Pro-+, DirectVent Pro-+, FasNSeal-+, FasNSeal-+ W2, FasNSeal-+ Flex, and PolyPro-+, and M&G DuraVent's relining products including DuraLiner-+, DuraFlex-+ (SW, Pro, 316, 304), and Ventinox-+. G¬= Any M&G DuraVent product sold by a non-approved website will not be warranted. G¬= Any customer that has bought product from a non-approved website will not be given technical assistance or support from M&G DuraVent. G¬= Any website not compliant with this Internet Sales Policy shall not use M&G DuraVent's trademarked and registered properties, and will be notified to remove them immediately. DuraVent reserves the right to enforce its intellectual property rights against entities not in compliance with this Internet Sales Policy. |
DuraVent Part Number: 4680-O
DuraLiner, 6" Oval Stove Connector This item cannot ship to APO/FPO addresses. . M&G DuraVent provides no warranty for the following professional products if such products are not installed by a trained professional installer: DuraTech-+, DuraPlus HTC-+, DuraChimney-+ II, PelletVent Pro-+, DirectVent Pro-+, FasNSeal-+, FasNSeal-+ W2, FasNSeal-+ Flex, and PolyPro-+, and M&G DuraVent's relining products including DuraLiner-+, DuraFlex-+ (SW, Pro, 316, 304), and Ventinox-+. G¬= Any M&G DuraVent product sold by a non-approved website will not be warranted. G¬= Any customer that has bought product from a non-approved website will not be given technical assistance or support from M&G DuraVent. G¬= Any website not compliant with this Internet Sales Policy shall not use M&G DuraVent's trademarked and registered properties, and will be notified to remove them immediately. DuraVent reserves the right to enforce its intellectual property rights against entities not in compliance with this Internet Sales Policy. |
6" DuraLiner Masonry Thimble with Slip Connector is used to penetrate masonry chimney to allow connection of DuraBlack or DVL to DuraLiner. Adaptor must be used to attach the connector pipe to the masonry thimble.
|
6" DuraLiner Oval Spacer is used to maintain a 1" clearance with flex sections of DuraLiner.
|
6" DuraLiner Oval Tee with Round Branch provides a connection between Masonry Wall Thimble, Wall Pass-Through, or stove connector pipe to oval DuraLiner. Single-wall.
|
This slip connector and hanger is used with a transition anchor plate to connect DuraLiner to DuraTech, DuraPlus, or DuraTech Premium chimney.
|
6" Duraliner Stainless Steel 30-Degree Elbow is used as an insert connector to DuraLiner. Features built-in fittings for easy connection to DuraLiner. Elbows are single-wall.
|
6" Duraliner Stainless Steel 45-Degree Elbow is used as an insert connector to DuraLiner. Features built-in fittings for easy connection to DuraLiner. Elbows are single-wall.
|
6" Duraliner Wall Pass-Through is used to connect to a DuraLiner tee. Transitions DuraLiner through a masonry chimney and a combustible wall. Allows the connection of DuraBlack pipe when used with the appropriate adaptor. DVL black pipe will connect directly to the Wall Pass-Through.
|
11" DuraPlus Square Ceiling Support Box is used with flat, vaulted, or cathedral ceilings. Square Ceiling Support Box is painted black. Supports up to 35' of DuraPlus Chimney. Starter Section built-in. Trim included.
|
6" DuraPlus 36" Close Clearance Shield is used in installations where a 7" or 8" DuraVent chimney system passes through a roof opening with less than the normal 2" minimum clearance to roof trusses or rafters. Chimney pipe must be centered within Close Clearance Shield.
|
36" DuraPlus Square Ceiling Support Box is used with flat, vaulted, or cathedral ceilings. Square Ceiling Support Box is painted black. Supports up to 35' of DuraPlus Chimney. Starter Section built-in. Trim included.
|
This adjustable wall strap is used in interior or exterior installations to support and to stabilize the chimney while assuring a 2" clearance. Wall straps are required every 4' on exterior of building. Adjusts 2"-6" from wall.
|
This 0/12 - 6/12 roof flashing is used to weather-proof the penetration of chimney pipe through the roof. Storm collar required.
|
This attic insulation shield is required for installations that pass through an attic to prevent insulation and debris from accumulating near the chimney. Fits over firestop radiation shield or a support box. Consists of two parts: a collar and a base.
|
6" DuraPlus Black 13" x 21" Transition Anchor Plate is used with a Slip Connector and Hanger in chimney restoration to connect DuraLiner pipe to DuraTech, DuraPlus, or DuraTech Premium Chimney. Painted black.
|
This firestop radiation shield is used in ceiling/floor penetrations when a ceiling support is not used. Not required when passing through the roof. Fits on underside of ceiling and adjusts to cover framing.
|
This flat ceiling support box supports the chimney pipe and provides a positive connection between support box and chimney with a built-in twist-lock. Designed for installation in flat ceilings only. Supports up to 35' of DuraPlus chimney pipe. Use adaptor to attach DVL or DuraBlack to the support box. A 2" wide trim collar is included. Not painted, but can be painted with high temperature paint.
|
This flat roof flashing is used to weather-proof the penetration of chimney pipe through the roof. Storm collar required.
|
|
|
|
|
Copyright © 1999-2024 BuilderDepot, Inc. Site Designed and Maintained by Inline Internet Systems, Inc. |